Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

09.06.2025 07:04

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

so, what happens?

The other is “what does a “fuse” do?”

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Thunder -750 favorites in NBA Finals over Pacers - ESPN

This is the picture of an electronic coil of wire wound around a core of magnetic material.

This is where the MOV conducts again, and dissipated the energy.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

How do you find out who your handler is as a targeted individual?

Upvotes:

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–14 [Omar Gharbi Omar Gharbi ]

New Jersey Man Arrested for Stealing Instruments From Heart - Rolling Stone

but I think this circuit , shows a few more pieces.

These are simplified answers to the original question, and does not change anything I wrote above.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Why is Russia always right? All eyes toward Russian glory!

In schematic diagrams this is the symbol for a fuse:

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

For this case there are devices called Metal oxide varistors (MOV).

A 35-year-old woman suffered a stroke on an international flight. A Houston doctor believes he knows why. - KHOU

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

It also is a device that limits the change in current flow.

Now when you have a certain ac resistance, then a current flows in a loop.

What is the most heartbreaking or sad love story that you ever had (experienced)?

This is 'the assistant's answer'

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

But it can get overloaded, and no longer works.

Was Jesus Christ Jewish?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

What is lightning?

the problem then depends on "how fast does the fuse operate?".

Mission Control: Eye of the Storm - NASA (.gov)

It seems Mohan does not understand the difference between a comment and an Answer.

Barnstars:

This device then solves the entire problem.

Any straight men had a gay experience in the past? What was it and how did you feel?

eight

These devices are installed between the “hot” and “neutral” and protective ground.

Here is a simplified AC power diagram.

Rory defends snubbing media, cites 'weird week' - ESPN

What does a fuse do?

One

One is “what exactly is in a ‘surge protector’ ? ”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At least they know the answer if they wanted it.

The third is lightning and “how it gets conducted into a home.”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is where this question deviates from being a 'generic' question, and becomes more specific.

I post the exact comment here.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

He then asserts :

But… the neutral is now “floating” because of the 1 ohm resistance.

He then describes the function of a fuse.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

(Dc diagram shown, AC is similar).

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There are three different concepts here that are getting confused.

what exactly is a ‘surge’ protector?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At one ohm, the resistor has a maximum of 1 watt power.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

The bolt then partially travels down the line to your home.

a photo is worth a thousand words.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

An AC voltage/ current source, and an ac inductive load.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

but this device (an Inductor) … impedes the rapid changes in the current.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

First Sentence:

[old diagram got deleted by accident]

2024–10–16 [ OO OLAOYE OYEBODE ]

nine

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[image of Common-mode choke]

He then describes Rainy Season and Lightning.

2024–10–10[John johnson John Johnson ]

A fuse is a non-resetable over current circuit protector.

This one hit behind the barn.

There are two important concepts here.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Edit 2024–10.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

A circuit breaker is similar, but is resettable.

Because the load is inductive, the current lags the voltage.(by a bit).

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".